JBL CD350 Classic Owner's Manual
             |
Pg 10 JBL CD350 Classic Owner's Manual ENOperationPowerThe power switch on the rear panel switches the CD player on or off. When you have finished makingconnections, switch the player on.StandbyThe Standby button on the front panel switches the CD player between standby and on (operating).Auto StandbyThis CD player is designed to enter standby automatically after 20 minutes with no audio playing and nouser interaction. This is to meet international power consumption regulations. This can be turned off in themenu. To use the menu, see page 11.Playing a CDThe JBL CD350 can play audio and data CDs. Please refer to supported media on page 11.If not already selected, the CD tray can be selected for playback using the right navigation key on theremote control.To open the CD tray, press the (eject) button on the front of the CD player, the drawer will open. Placeyour CD on the tray with the label facing up (shiny side down).Now press the (eject) button on the front of the CD player to close the drawer, or press (play) toclose the drawer and start playback.Note: This CD player is only designed to accept compact discs. Ingress of other items(including but not limited to foodstuffs, beverages or appendages) is likely to cause damageor injury which will not be covered by the warranty.Playing from a USB storage deviceThe JBL CD350 can play music files stored on a USB flash drive. Please refer to supported media onpage 12.If not already selected, the USB input can be selected for playback using the left navigation key on theremote control.Insert the USB storage device into the USB socket on the rear panel. Do not use a USB extension cable.Now press (play) to start playback.To change folder, use the up or down navigation keys on the remote control.Note: The player will play files in a folder in chronological order. |
Related manuals for JBL CD350 Classic
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine