Pg 8 JBL CD350 Classic Owner's Manual ENConnecting the CD playerAnalog ConnectionStep 1, ensure power is disconnected from the CD player and amplifier.Step 2, using analog interconnect cables, connect the right (R), red terminal of the analog output on theCD player to the right (R), usually red terminal of the CD input on your amplifier.Step 3, connect the left (L), white terminal of the analog output on the CD player to the left (L), usuallywhite terminal of the CD input on your amplifier.Top Tips▪ After making connections: switch the amplifier on with no input and reduce the volume to minimum.Select the CD input, and then slowly increase the volume to a suitable listening level whilst playinga CD. This technique will avoid loud sounds or product damage in the event of incorrectconnection.▪ If you are unsure as to how your system should be connected, please contact your JBL dealer whowill be happy to help you.