www.jbl.comEnglishDISPLAYUse the included 6m (19.7 ft) cable to connect the display unit to the MS-8’s main unit’s display connection.Insert the cable’s straight connector into the main unit and the right-angle connector into the display.NOTE: The display unit must be connected during setup but may be disconnected after setup and afteryou’ve made any additional adjustments in the Audio Controls menu (see Audio Controls Menu, on page 36).If the display unit is disconnected after setup and final adjustment, you will not be able to make any additionalMS-8 adjustments, and the remote control will not function. See Main Menu, on page 35.MICROPHONEThe included binaural microphone headset must be connected to the MS-8’s Mic connection during thecalibration/setup process. Once setup is complete, unplug the microphone headset and store it in a safeplace.IMPORTANT: Do not use any other microphone with the MS-8.REMOVEFORSOFTWAREUPDATEPlug angled connectorinto displayPlug straight connectorinto main unitConnect to mic inputCONNeCTiONs15