JCM GLOBAL VEGA 100 Service Training Manual
                        | |
Contents
| 
Part No. 960-000165R_Rev. 1 © 2013, JCM American, Corporation2 0Lecture NotesVEGA™ Banknote Acceptor JCM Training Overview July, 2013OFF-LINE BANKNOTE ACCEPTANCE TESTPerform the following steps to perform the VEGA's Off-Line BanknoteAcceptance Test.1. Ensure the VEGA's power is OFF.2. Set DS1, Switches #1, #3 & #5 ON.3. Apply power to the VEGA.4. Set DS1, Switch #1 OFF. This begins the Off-line Banknote Acceptance Test.Wait for the Front Panel LED to indicate Stand-by Mode, and then insertBanknotes. Specific denominations are identified by Front Panel LED blinksequences. Refer to the specific Country’s Software Information Sheet foracceptable denomination value settings.Error and Reject Code TablesTable 10 lists the various VEGA Error Code LED combinations.Table 10 LED Error CodesOn-Line Off-LineError Possible CauseColor Flashes(mSec) Color Flashes(mSec)Yellow 1 (300) Yellow 1 (300) ROM Error ROM malfunction. Re-download Software. Change the CPU Circuit Board.Yellow 2 (300)\ Yellow 2 (300) RAM Error RAM malfunction. Change the CPU CircuitBoardRed 3 (300)\ White 3 (300) Feed Motor Low Speed During Feed Motor operation, no pulse input exists greater than the rated value.Red 3 (300)\ White 5 (300) Feed Motor High Speed During Feed Motor operation, no pulse input exists greater than the rated value.Red 3 (300)\ White 7 (300) Feed Motor Lock-up During Feed Motor operation, no pulse input exists greater than the rated value.Red 3 (300)\ Purple 5 (300) Stacker Motor Lock-up During Stacker Motor operation, no pulse inputs exist greater that the rated value.Red 3 (300)\ Purple 7 (300) Stacker Motor Gear Problem Pusher Mechanism stays in its home position while Stacker Motor is operating.Red 3 (300)\ Blue 5 (300) Banknote Transport Slips An abnormal Banknote transport error occurs when transporting or rejectingBanknotes.Red 3 (300)\ Blue 7 (300) Transport Times Out Transportation locks-up or runs to slow.Red 3 (300)\ Red 3 (300)\ Abnormal Timing Response Sensors detect Banknotes remain in-path or none exist during abnormal timing.Red 3 (300)\ Red 5 (300)\ Cash Box Seating Cash Box Sensors detected a Banknote remains in-path or a Cash Box is notproperly seatedRed 3 (300)\ Purple 3 (300) Pusher Mechanism Position Pusher Mechanism Home Sensor detected that the Pusher Mechanism is notpresently seated at the Home end position.Red 3 (300)\ Orange 3 (300) Stacker Full When the Pusher Mechanism moves toward stacking, the Stacker-Full Sensordetermined that the time taken is longer than the specified value for the function.Red 3 (300)\ Cyan 3 (100) Operational Pause Intake Sensor detects a Banknote at a position where it cannot be returned while inthe transport process.NOTE: If an Error or Reject condition occurs, refer to Table 10 or Table 11respectively to identify the cause of the malfunction. |
manualsdatabase
Your AI-powered manual search engine