25Typematic Rate SettingKeystrokes repeat at a rate determined by the keyboard controller. When enabled, thetypematic rate and typematic delay can be selected. The settings are: Enabled/Disabled.Typematic Rate (Chars/Sec)Sets the number of times a second to repeat a keystroke when you hold the key down. Thesettings are: 6, 8, 10, 12, 15, 20, 24, and 30.Typematic Delay (Msec)Sets the delay time after the key is held down before is begins to repeat the keystroke. Thesettings are 250, 500, 750, and 1000.Security OptionThis category allows you to limit access to the system and Setup, or just to Setup.System The system will not boot and access to Setup will be denied if thecorrect password is not entered at the prompt.Setup (default) The system will boot, but access to Setup will be denied if the correctpassword is not entered prompt.OS Select For DRAM > 64MBAllows OS2 to be used with >64MB or DRAM. Settings are Non-OS/2 (default) and OS2.Set to OS/2 if using more than 64MB and running OS/2.3-6 Advanced Chipset FeaturesThe Advanced Chipset Features Setup option is used to change the values of the chipsetregisters. These registers control most of the system options in the computer.CMOS Setup Utility – Copyright(C) 1984-2004 Award SoftwareAdvanced Chipset FeaturesItem HelpDRAM Timing Settings By SPDSDRAM CAS Latency Time AutoSDRAM Cycle Time AutoSDRAM RAS-to CAS Delay AutoSDRAM RAS Precharge Time AutoSystem BIOS Cacheable EnabledVideo BIOS Cacheable EnabledMemory Hole at 15M-16M Disabled> PCIExpress Root Port Function Press Enter** VGA Setting **PEG/Onchip VGA Control AutoPEG Force X1 DisabledOn-Chip Frame Buffer Size 32MBFIXED Memory Size 64MBDVMT Memory Size 64MBMenu Level >↑ ↓ → ← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General HelpF5:Previous Values F6:Optimized Defaults F7:Standard Defaults