JETWAY 915GDAPR1A User Manual
                                              | |
Contents
| 
343-11 Miscellaneous ControlThis section is for setting CPU Frequency/Voltage Control.CMOS Setup Utility – Copyright(C) 1984-2004 Award SoftwareMiscellaneous ControlItem HelpCPU Clock Ratio 8 XAuto Detect PCI/DIMM Clk EnabledSpread Spectrum DisabledHOST Clock at Next Boot is 100MHzDRAM Clock at Next Boot is AutoCPU Vcore Select DefaultVDD1.5 Select 1.5VVRAM Settings 2.6VVRAM Under Voltage Protect DisabledVDD1.5V Under Voltage Protect DisabledFlash Part Write Protect EnabledMenu Level >↑ ↓ → ← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General HelpF5:Previous Values F6:Optimized Defaults F7:Standard DefaultsAuto Detect PCI/DIMM ClkThis item allows you to enable/disable auto detect PCI Clock.The settings are: Enabled, Disabled.Spread SpectrumThis item allows you to set the CPU Host/PCI clock and Spread Spectrum.The settings are: Enabled, Disabled.Host Clock at Next BootThis item allows you to select CPU frequency step by step increasing.The choice are: 533MHz CPU---133MHz~350MHz, 800MHz CPU---200MHz~350MHzDRAM Clock at Next Boot isThis item allows you select the DRAM Clock for DDR266/DDR333/DDR400. The setting are:DDR333 for P4/533MHz CPU, DDR333 /DDR400 for P4/800MHz CPUCPU Vcore SelectThis item allows you select CPU Vcore Voltage by increase 0.0125V step by step from0.8375V to 1.6V or 1.65V, 1.7V, 1.75V the Default setting is Default (CPU manufacturerDefault setting).VDD1.5 SelectThis item allows you to select 1.5V of the AGP VGA card. The choice are: Default, 1.5V,1.6V, 1.7V, 1.8V.VRAM SettingsThis item allows you to select DRAM Voltage. The choice are: 2.55V/2.6V/2.7V/2.8V.Flash Part Write ProtectThis item allows you protect your BIOS chip from Virus destroy data. When Flash BIOS youhave Disabled this item. |
Related manuals for JETWAY 915GDA
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine