FRLJETYD Operations Manual 37Figure 24. LoaDisc Washer Installed5. Install the lubricated nut by turning it clockwise down the bolt until it is firmly hand tightagainst the LoaDisc reaction washer.For proper installation only 3 or 4 threads should extend beyond the nutto be tightened.6. After all bolts on the joint have been prepped for installation following the above steps,tighten the nut using a JETYD LoaDisc socket/driver.7. Align the set screw on the socket with the drilled section on the splines of the jGun.
