17 englishJabra PrO 9460, 9460-DuO anD 9470 user manualPlacing the Headset in its Cradlewhenever you are not using your headset, you should keep it in its recharge cradle as shown in the figure below.It is held firmly in place by a magnet. note that placing it in its cradle is sometimes called docking the headset.when the headset is docked correctly in the cradle, an extra icon is displayed in the touchscreen’s status bar. seethe section “using the touchscreen”.Figure 11: Inserting the headset into the cradle for storage and chargingconnecting the BaSe to youR deSk Phone4.4Identifying Your Desk Phone Featuresthe way you connect and configure the Jabra Pro base will vary according to the type of desk phone you areusing. Check your phone (by looking at its connectors and/or documentation) to see which of the followingfeatures it has, then see the appropriate section below to learn how to connect your Jabra PrO base to thephone:- Standard desk phonethis type of phone does not include any built-in support for adding a headset. you will therefore connectthe Jabra PrO base between your desk phone’s handset and body, enabling you to use either the handset orheadset. all desk phones can be connected in this way.- Desk phone with headset portthis type of phone provides a dedicated headset port (usually at the back of the phone). these phonestypically also have a button on the front panel for switching between the headset and handset.- Desk phone with electronic hookswitchthis type of phone is able to place or answer a call automatically when you press the multifunction buttonon your headset. this requires a desk phone that includes an electronic hookswitch feature and also requiresan extra adapter cable from Jabra. Please see our web site and/or refer to your telephone’s user manual fordetails about electronic hookswitch compatibility.- Desk phone with GN1000 Remote Handset Liftera handset lifter physically lifts your handset from your desk phone when needed, thereby creating a solutionthat works similarly to an electronic hookswitch. the gn1000 remote handset lifter is available separately;please speak to your Jabra dealer for details.