Jabra PRO 9470 User Manual

Also see for PRO 9460 - 2: Quick start guide Datasheet Datasheet Datasheet

Contents

Jabra PRO 9470 User Manual Manual pdf 53 page image

53 englishJabra PrO 9460, 9460-DuO anD 9470 user manualPaiRing and connecting with otheR Bluetooth deviceS9.2Pairing the Base with a Mobile Phoneto use bluetooth, you must set up the wireless communication between the Jabra PrO 9470 base and yourmobile phone by pairing them. the setup wizard helps you to do this during the initial setup but you can run thewizard at any later time.1. launch the mobile-phone part of the setup wizard on the Jabra PrO base as described in Section 8.9: Re-runningthe Setup Wizards. this puts the base into pairing mode, which causes it to advertise itself as available forpairing.2. make sure that bluetooth is active on your mobile phone and put your phone into bluetooth pairing mode.the exact procedure for doing this varies by mobile phone manufacturer and model — see your mobilephone manual for details.3. your phone now looks to see if any nearby bluetooth devices are advertising themselves for pairing. useyour phone’s controls to identify and select the “Jabra PrO 9470” device. your phone might also ask for theheadset’s pass code. the pass code for all Jabra devices is 0000 (four zeros).JABRA PRO4. your phone attempts to connect to the base and then shows you the result of the attempt. If the attemptfails, please try again. If you are still having trouble, please check your mobile phone documentation and/orcontact technical support for Jabra and/or your mobile phone.Note: all communications between your Jabra PrO 9470 base and your mobile phone are encrypted, soothers will not be able to intercept and understand your conversation. establishing this encryption is animportant part of the pairing process.Managing Bluetooth ConnectionsJust because two devices are paired, does not necessarily mean they are connected, which means that the linkbetween them is active. usually, the base manages its bluetooth connection automatically even as you takethe mobile phone out of range and/or turn off the devices from time to time. however Jabra PrO does providecontrols for managing the connection manually if necessary, as described below.to drop the connection from the base to your mobile phone (for example, because you would like to connectyour mobile phone to another device), do one of the following:- use the base touchscreen menus as described in Section 8.8: Setting General User Preferences.- use the menu system on your mobile phone as described in your phone’s documentation.If two paired devices are turned on and in range but fail to connect automatically, you can connect manuallyusing the base and/or mobile phone menu commands.