Jacuzzi BZ00000 Installation And Operating Instructions Manual

Contents

Jacuzzi BZ00000 Installation And Operating Instructions Manual Manual pdf 4 page image

Important: Read complete instructions before beginning installation.Each unit arrives ready for installation, equipped with base, glass and associated hardware.Remove the unit from the carton. Retain the shipping carton until satisfactory inspection of the product has beenmade.Immediately upon receipt, inspect the base and other components before installing. Confirm your unit matches yourinstallation rough-in. Check all carton inserts for parts and hardware. Should inspection reveal any damage or defectin any component, do not install the unit. Damage or defect to any component claimed after the unit is installed isexcluded from the warranty. Jacuzzi Whirlpool Bath's responsibility for shipping damage ceases upon delivery of theproducts in good order to the carrier. Refer any claims for damage to the carrier. For definitions of warranty coverageand limitations, refer to the published warranty information packed with the product.Jacuzzi Whirlpool Bath © is not responsible for any defect that could have been discovered, repaired, or avoided byfollowing this inspection.DIMENSIONSBASE SPECIFICATIONSShown is 2 wall left hand base. Right hand opposite. The 3 wall base has tile flange on both sides and back.PRODUCT WEIGHT (Base and Enclosure )950 lb(431 kg)TOTAL WEIGHT/FLOOR LOADING1266.6 lb (574.5 kg)63.3 lb/sq. ft. (332.1 kg/m2 )SPECIFICATIONSNOTE: MINIMUM WATER PRESSURE FOR THE SYSTEM IS 45 PSI WITH 3/4" HOT & COLD SUPPLY SERVICE.48"27-11/16"TOP VIEW72"1/2" FLEXIBLEWATER SUPPLYHOSES UNDERBASE(BOTH SIDES)AIR SUPPLY HOSEFRONT VIEW4-1/2"18-11/16"1-1/2" TILE FLANGE6-1/2"27-1/4"30-1/4"21-1/16"2Jacuzzi Whirlpool Bath © BZ00000 03/05