Jacuzzi J - 315 Owner's Manual

Also see for J - 355: Manual Instructions for preinstallation Instructions for preinstallation Owner's manual Owner's manual

Contents

Jacuzzi J - 315 Owner's Manual Manual pdf 34 page image

30J-30011.5 Selecting the Circulation Pump Filtration CyclePress and hold the Jets pump 1 ( ) and Cooler ( ) buttonat the same time for 3 seconds to access the circulation pumpprogramming. Continually press the Warmer ( ) button to scroll upthrough the cycles below. Then select a cycle and press the Jets pump1 ( ) button to activate that cycle. Upon pressing the jets pump 1button the system will save your selection, exit the program menu andreturn to the main menu.Note: After 10 seconds the programming screen will revert back to thetemperature if no buttons are pressed. You cannot have more than onecirculation pump cycle activated at a time.0 hours of circulation per day4 hours of circulation per day8 hours of circulation per day (recommended factorydefault setting for J335-J375 models)12 hours of circulation per day16 hours of circulation per day20 hours of circulation per day24 hours of circulation per day (recommendedfactory default setting for J315 and J325 models)For J335 to J375 models:To set a time for the first filtration/heating cycle, simply turn power on tothe spa two minutes prior to the desired time. Example: If you desire yourfirst filtration/heating cycle to begin at 10:00 AM turn off power to the spaand turn it back on again at 9:58 AM. Start time is approximate and mayvary slightly from day to day.Note: If the circulation pump filtration cycle is interrupted or turned off;the duration of the cycle will not be extended once spa functions resume.Example: If the spa is set to cycle for 8 hours and only runs for 2 hoursbefore the interruption, once functions resume it will not continue to cyclefor another 6 hours, if the 8-hour cycle time has expired.For J315 and J325 models:The recommended factory default setting is 24 hours. This settingshould not be altered. Running the circulation pump less than the factoryrecommended time will result in issues with water quality maintenance.