Jacuzzi J - 400 SERIES J - 460 Owner's Manual

Also see for J - 465: Instructions for preinstallation Instructions for preinstallation Owner's manual Owner's manual Owner's manual

Contents

Jacuzzi J - 400 SERIES J - 460 Owner's Manual Manual pdf 68 page image

Page 63J-400 SeriesPress a second time to deactivate or press RDM button to cancelRPT function.4. searching File or Folder in mP3/wma CDTo Search File in CDP (MP3/WMA) mode: Press AS/PS button (6) to•enter track searching mode. Then press the VOL up/down button (3)to scroll through available tracks. At desired track, press ENT button(9) to confirm selection. Once a track is selected, it will automaticallybegin to play.To Search Folder in CDP (MP3/WMA) mode: Press and hold AS/•PS button (6) for 2 or more seconds to enter folder searching mode.Then press VOL up/down button (3) to search through availablefolders. At desired folder, press ENT button (9) to confirm selection.Once a folder is selected, it will automatically begin to play the firsttrack in the selected folder.5. Display ID3While in MP3 or WMA track is playing, you can know its ID3information by following operation:Press and hold ENT button (9) for about 2 seconds until it displays•“SHIFT” icon on LCD. Then repeatedly press MODE to displayTITLE, FILE, ARTIST, and ALBUM.note: The intervals between each push should be less than 4 seconds.Once the “SHIFT” icon disappears from the LCD, it would work aschanging mode. After the “SHIFT” icon disappears from the LCD, it wouldscroll the selected ID3 information on LCD.20.5 J-1000™ audio system usB & nanD Operation1. Play usB or nanD (internal memory)Open the front panel and plug a USB device into the USB DockingStation (10). The USB device will begin to play automatically. Closethe front panel. The “USB” symbol on the display indicates that aUSB device is connected.To Play connected USB device: Press MODE button (4) to change•to USB mode. The USB will play. The display (17) shows the currenttrack, play time, and USB symbol. If no USB device is connected,simply plug a USB device into the USB docking station (10) and theunit will automatically switch to USB mode.To Play NAND: Press MODE button (4) to change to NAND mode.•The NAND will play. The display shows the current track and playtime. The Play/Pause, Repeat, and Random function for USB andNAND are the same as CD Player Operation (pages 62-63).