Jacuzzi J - 480 Owner's Manual

Also see for J - 465: Instructions for preinstallation Instructions for preinstallation Owner's manual Owner's manual Owner's manual

Contents

Jacuzzi J - 480 Owner's Manual Manual pdf 90 page image

Page 84J-40012. Open/Close Front PanelPress firmly on the release button (15),then open front panel (16) by gentlylifting upward on bottom edge. To closefront panel, gently flip panel down, thenpress firmly on panel directly aboverelease button (15) until you hearan audible “click”. Keep front panelclosed at all the times to prevent waterintrusion, except when changing discs.nOTe: Never insert wet discs into unit or CDplayer will be damage!19.3 J-1000 audio system radio Operation1. radio Operation.Press MODE button (4) to select Radio mode. Station frequency isindicated on display.To Select Band: Press BAND button (8) repeatedly to scroll through•radio mode as follows: FM1 --> FM2 --> FM3 --> AM1 --> AM2-->FM1. Each radio band stores up to 6 independent stations, for atotal of 18 FM and 12 AM presets.To Program• Station Presets in Radio mode: Press and hold SHbutton (9) until display reads “SHIFT”. Immediately afterwards,press and hold the Tune Up/Down button (2) for 2 seconds, thenrepeatedly press to select preset 1 to 6. At desired preset, press theENT button (9) to store current frequency into selected preset.note: When power to spa is shut off for any reason, all station presetsare reset.2. automatically setting station PresetsPress and hold the AS/PS button (6) for approximately 2 secondsuntil you hear a beep that confirms the memory function is engaged.The unit will search for six strong stations and automatically storethem on the current band. All 18 FM and 12 AM presets can be setsequentially by selecting the next band and continuing the operationduring auto programming.3. seek/manual TunePress TUN Up/Down button (2) once to activate manual tuningmode, then press TUN Up/Down repeatedly to manually increase ordecrease displayed frequency. Press and hold either TUN Up/Downbutton (2) for at least 2 seconds to activate auto tuning mode. Theunit will automatically search and stop at the next higher or lower sta-tion with sufficient signal strength.12 17 39875461011131512161418