Jacuzzi J - LX Owner's Manual

Also see for J - LXL: Instructions for preinstallation Instructions for preinstallation Instructions for preinstallation Owner's manual Installation manual and use & maintenance

Contents

Jacuzzi J - LX Owner's Manual Manual pdf 37 page image

33LX Collection11.6 Programming the CLEARRAY® (Ultraviolet) WaterPurification SystemA. Programming the CLEARRAY System (U) or Corona DischargeOzone (O3)Press and hold the Jets pump 1 ( 1 ) and Cooler ( ) button at thesame time for 3 seconds. Scroll pass the circulation pump programmingmenus by pressing the Warmer button, Figure 1.Press Press Press Press PressPressPressWill take youback to “C0”Will select“O3” optionand exit menuPress1Press1. After the last cycle, “C6”, the LED screen will display “U” or “O3.”If the LED screen is displaying “U” then pressing the Jets pump1 will change the sanitizing system from “U” to “O3” and exit theprogramming menu. If the LED screen is displaying “O3” thenpressing the Jets pump 1 will change the sanitizing system from “O3”to “U” and exit the programming menu. You will see one of the twoconfigurations below:A. C0, C1, C2, C3, C4, C5, C6, U, 365 (duration countdown timer)B. C0, C1, C2, C3, C4, C5, C6, O3, =Note: For the O3 option the “=” disables the duration countdown timer.2. If you do not wish to change the option do not press any buttons andafter 10 seconds the display will return to the main menu.Note: If the CLEARRAY System has been selected, whenthe time allotted has expired (365 days) the display screenwill flash between the water temperature and “blb.” At thistime the UV bulb must be replaced, the quartz tube must becleaned and the duration countdown timer needs to be reset.