Page 88.0 Control Functions8.1 Control PanelA. LED Display: Candisplay current watertemperature (defaultdisplay), water tempera-ture set point, selectedskimming/heatingmode, and error mes-sages.B. Warmer ( + ) Button:Increases water tem-perature set point.C. Cooler ( - ) Button: Decreases water temperature set point.D. Light Button: Controls Spa Light See Section 9.3, page 22E. Jets 1 Button: Turns jets pump # on and off. Press once for lowspeed; press a second time for high speed; press a third time to turnpump off.F. Jets 2 Button: turns high-speed jets pump #2 on and off. Pressonce to turn on; press a second time to turn pump off (2-pump mod-els only).G. Heat Indicator: Lit when heater is on.Operation Details• Temperature Adjustment: 65 to 04°F (8 to 40°C). Factory defaultsetting is 00°F (38°C).• Underwater Light operation: Light runs for hour then shuts off.• Jets 1/Jets 2 Button operation: Jets run for 20 minutes afteractivated, then turn off automatically to conserve energy. Simplypress either jets button to continue operation for an additional 20minutes.GAB C DEF2-Pump Control Panel Shown.2 Pump Control Panel Shown