James Rebarscope R-C-400 Operator's Manual
                                                                            | |
Contents
| 
8www.ndtJames.comFor Quick Reference, in “LOCATE COVER” screen:1. For Automatic (RS), Short or Deep mode, go to lineand press the Left arrow button to changebetween settings.2. For Audio Feature – go to and press theRight arrow button once for beeps, twice for continuoustone, and three times for audio off.3. Material Options – Rebar (Post Tension Cable) / Conduit /Copper.System MenuUsing the Rebarscope® on LocationRemoving the LidFor ease of use in the field, the Rebarscope® lid can beremoved and the shoulder straps installed. To do so, fully openthe lid and the cover can be carefully pushed off of the casehinge pins.Attaching the Shoulder Support StrapsThe Rebarscope® support straps can be used to hold theRebarscope® once the Rebarscope® lid has been removed.When using the Rebarscope® support straps, make sure that aneyelet hook is connected to each corner of the Rebarscope® .Two of the hooks clip to the O-rings, while the other two cliparound the hinge pins. Follow the step below:1. Attach the straight portion of the support strap to thetwo front metal O-rings of the Rebarscope®.2. Attach the other two straps (which are stitched to thestraight portion of the harness) to the new exposedhinges of the case.3. Pull the supplied support strap over your head so thatthe rubber guard is resting on the back of the user’sneck. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine