IntroductionGetting AcquaintedTRIUMPH-1 Receiver20 www.javad.comMinPadThe MinPad is the receiver’s minimum interface used to display and control data input and output(Figure 1-2).Figure 1-2. TRIUMPH-1 MinPadThe BAT (battery) LED displays the power status for battery and receiver’s mode:• No light - receiver is off/ no external power/sleep mode is off• The LED color indicates the battery status:• Green – full.• Yellow – half.• Red – almost empty.The table below summarizes the BAT LED pattern:Table 1-1. BAT LED PatternFNOn/OffBAT RECBTMOD SATPOSExternal power Receiver ON Sleep mode LED PatternNo No No No lightNo No Yes YGR 1 rapid blinking every 10 sec, 8 sec of off gapsNo Yes No LED solid according to the battery (green, yellow or red). Seebattery status indication aboveNo Yes Yes YGR rapid blinking every 10 sec, 8 sec of solid according to batteryYes No No LED blinks 2 according to the batteryYes No Yes YGR rapid blinking every 10 sec, 8 sec of blink according to batteryYes Yes No LED blinks 2 according to the batteryYes Yes Yes YGR rapid blinking every 10 sec, 8 sec of blink according to battery
