Receiver and File MaintenanceClearing the NVRAMUsing TriVU to Clear NVRAM88 www.javad.com4. Wait until the four LEDs blink yellow.5. Release the FN key.5.5.2. Using TriVU to Clear NVRAM1. Connect your receiver and computer. See “Connecting the Receiver and a Computer” onpage 37 for this procedure.2. Start TriVU. Select the COM port and click Ok (Figure 5-7).Figure 5-10. Connection Parameters3. Click the ToolsClear NVRAM (Figure 5-11).Figure 5-11. Clear NVRAM4. Click OK at the clear NVRAM confirmation dialog box. The REC LED rapidly flashesgreen and red; the SAT LED flashes red.The receiver will automatically disconnect once the NVRAM is cleared.
