Jenn-Air DOUBLE REFRIGERATOR DRAWERS W10310149A Installation Instruction And Care Manual

Contents

6Water Supply RequirementsGather the required tools and parts before starting installation.Read and follow the instructions provided with any tools listedhere.IMPORTANT:■ If you turn the refrigerator on before the water line isconnected, turn the ice maker OFF.■ All installations must meet local plumbing code requirements.■ Use copper tubing and check for leaks. Install copper tubingonly in areas where the household temperatures will remainabove freezing.TOOLS NEEDED: Flat-blade screwdriver, ⁷⁄₁₆" and ¹⁄₂" open-endwrenches or two adjustable wrenches, ¹⁄₄" nut driver and drill bit,cordless drill.NOTE: Your refrigerator dealer has a kit available with a ¹⁄₄"(6.35 mm) saddle-type shutoff valve, a union, and copper tubing.Before purchasing, make sure a saddle-type valve complies withyour local plumbing codes. Do not use a piercing-type or ³⁄₁₆"(4.76 mm) saddle valve which reduces water flow and clogs moreeasily.Water PressureA cold water supply with water pressure of between 30 and120 psi (207 and 827 kPa) is required to operate ice maker. If youhave questions about your water pressure, call a licensed,qualified plumber.Reverse Osmosis Water SupplyIMPORTANT: The pressure of the water supply coming out of areverse osmosis system going to the water inlet valve of therefrigerator needs to be between 30 and 120 psi(207 and 827 kPa).If a reverse osmosis water filtration system is connected to yourcold water supply, the water pressure to the reverse osmosissystem needs to be a minimum of 40 to 60 psi (276 to 414 kPa).If the water pressure to the reverse osmosis system is less than40 to 60 psi (276 to 414 kPa):■ Check to see whether the sediment filter in the reverseosmosis system is blocked. Replace the filter if necessary.■ Allow the storage tank on the reverse osmosis system to refillafter heavy usage.If you have questions about your water pressure, call a licensed,qualified plumber.Product DimensionsStyles 1 and 2 - Euro Series and Overlay■ Height dimensions are shown with the leveling legs extendedto ¹⁄₄" (6.35 mm) below the refrigerator drawers.■ When leveling legs are fully extended to 1" (25 mm) below therefrigerator drawers, add ³⁄₄" (19.05 mm) to the heightdimensions.■ The power cord is 60" (152.4 cm) long.Style 1 - Euro SeriesStyle 2 - OverlayDrawer Opening DimensionsDimensions vary based on model, as shown.Style 1 - Euro Series14⁷⁄₈"(37.8 cm)14⁷⁄₈"(37.8 cm)34¹⁄₈"(86.7 cm)³⁄₈"(1.0 cm)14⁷⁄₈"(37.8 cm)14⁷⁄₈"(37.8 cm)34¹⁄₈"(86.7 cm)³⁄₈"(1.0 cm)18⁹⁄₁₆"(47.2 cm)22¹⁄₂"(57.2 cm)21"(53.3 cm)