Jenn-Air JDR8895BAS13 Installation Instructions Manual

Also see for JDR8895BAB13: Installation & use manual Installation instructions Parts list Installation Instructions and Use & Care Guide

Contents

Cabinetopeningdimensionsthatareshownmustbeused.Givendimensionsareminimumclearances.Theflooranti-tipbracketmustbeinstalled.Toinstalltheanti-tipbracketshippedwiththerange,see"InstallAnti-TipBracket"section.• Groundedelectricalsupplyisrequired.See"ElectricalRequirements"section.• Propergassupplyconnectionmustbeavailable.See"GasSupplyRequirements"section.• Contactaqualifiedfloorcoveringinstallertocheckthatthefloorcoveringcanwithstandatleast200°F(93°C).• Useaninsulatedpador1¼,,(0.64cm)plywoodunderrangeifinstallingrangeovercarpeting.IMPORTANT:Toavoiddamagetoyourcabinets,checkwithyourbuilderorcabinetsuppliertomakesurethatthematerialsusedwillnotdiscolor,delaminateorsustainotherdamage.ThisovenhasbeendesignedinaccordancewiththerequirementsofULandCSAInternationalandcomplieswiththemaximumallowablewoodcabinettemperaturesof194°F(90°C).Mobile Home - Additional Installation RequirementsThe installation of this range must conform to the ManufacturedHome Construction and Safety Standard, Title 24 CFR, Part 3280(formerly the Federal Standard for Mobile Home Constructionand Safety, Title 24, HUD Part 280). When such standard is notapplicable, use the Standard for Manufactured HomeInstallations, ANSI A225.1/NFPA 501A or with local codes.In Canada, the installation of this range must conform with thecurrent standards CAN/CSA-A240-1atest edition, or with localcodes.Mobile home installations require:• When this range is installed in a mobile home, it must besecured to the floor during transit. Any method of securingthe range is adequate as long as it conforms to the standardslisted above.• Four-wire power supply cord or cable must be used in amobile home installation. The appliance wiring will need to berevised. See "Electrical Connection" section.Product DimensionsAA. 357/8'' (91.1 cm) cooktopheight (minimum) withleveling legs screwed all theway in*B. Model/serial/rating plates(located behind the controlpanel)**C. 467/8 '' (119.1 cm) overall height(minimum) with leveling legsscrewed all the way in*D. 28" (71.1 cm) depth with handleE. 265/16 '' to 27¼" (66.8 to 69.2 cm)***F. 297/8 '' (75.9 cm) width*Range can be raised approximately 1" (2.5 cm) by adjustingthe leveling legs.**Model/serial/rating plates may be rotated up from behind thecontrol panel for viewing from the front of the range.***Excludes handle. Dimension given is from wall to front of ovendoor and will vary based on electric outlet receptacleinstallation.Cabinet DimensionsCabinet opening dimensions shown are for 25" (64.0 cm)countertop depth, 24" (61.0 cm) base cabinet depth and36" (91.4 cm) countertop height.IMPORTANT: If installing a range hood or microwave hoodcombination above the range, follow the range hood ormicrowave hood combination installation instructions fordimensional clearances above the cooktop surface.