Jenn-Air JES9750CAB00 Installation Instructions Manual

Also see for JES9750CAB01: Use & care guide Installation Instructions and Use & Care Guide

Contents

Power Supply Cord Direct WireElectrical Shock HazardDisconnect power before servicing.Use a new 40 amp power supply cord.Plug into a grounded outlet.Failure to follow these instructions can result in death,fire, or electrical shock.Electrical Shock HazardDisconnect power before servicing.Use 8 gauge copper or 6 gauge aluminum wire.Electrically ground range.Failure to follow these instructions can result in death,fire, or electrical shock.1=2.3.Disconnect power.Use Phillips screwdriver to remove the terminal block coverscrew located on the back of the range. Pull cover down andtoward you to remove cover.Remove plastic tag holding three 10-32 hex nuts from themiddle post of the terminal block.4. Add strain relief.Style 1: Power supply cord strain relief• Assemble a UL listed strain relief in the opening.AA. UL listed strain reliefFeed the power supply cord through the opening in thecord/conduit plate on bottom of range. Allow enoughslack to easily attach the wiring to the terminal block.• Tighten strain relief screw against the power supply cord.14