OVEN CAVITYDo not use oven cleaners.Food spills should be cleaned when oven cools. At hightemperatures, foods react with porcelain and staining, etching,pitting or faint white spots can result.Cleaning Method:• Self-Clean cycle: See "CustomClean TM Self-Cleaning withAdjustable Levels and Auto Lock" first.OVEN RACKSCleaning Method:• Self-Clean cycle:See "CustomClean TM Self-Cleaning with Adjustable Levelsand Auto Lock" first. Remove racks or they will discolor andbecome difficult to slide. If this happens, a light coating ofvegetable oil applied to the rack guides will help them slide.• Steel-wool padOr® LgtqsThe oven lights are 120-volt, 25-watt maximum halogen bulbs.They will come on when the oven door is opened. On doubleoven models, both upper and lower lights will come on wheneither door is opened. The oven lights will not work during theSelf-Cleaning cycle. When the oven door is closed, touch LIGHTto turn light on or off.To Replace:Before replacing the bulb, make sure the oven is off and cool.1. Disconnect power.2. Remove glass light cover by grasping the front edge andpulling away from oven.3. Remove bulb from socket.4. Replace bulb, using tissue or wearing cotton gloves to handlebulb. To avoid damage or decreasing the life of the new bulb,do not touch bulb with bare fingers.5. Replace bulb cover by snapping back into wall.6. Reconnect power.Excessive Weight HazardUse two or more people to move and install ovendoors.Failure to do so can result in back or other injury.IMPORTANT:To avoid oven door glass breakage:• Do not close the oven door if the racks are not fully insertedinto the oven cavity or when bakeware extends past the frontedge of an oven rack.• Do not set objects on the glass surface of the oven door.• Do not hit glass surfaces with bakeware or other objects.• Do not wipe down glass surfaces until the oven hascompletely cooled.For normal oven use, it is not suggested to remove the oven door.However, if removal is necessary, make sure the oven is off andcool. Then, follow these instructions. The oven door is heavy.To Remove:1. Open oven door to the full open position2. Locate the oven door latches in both corners of the ovendoor and rotate the latches forward to the unlocked position.A. Oven door latch in lockedpositionB. Oven door latch in unlockedposition3. Grasp the edges of the oven door with both hands and closethe oven door until it will no longer close. Lift and pull ovendoor toward you and remove.4. Set the oven door(s) aside on a covered work surface.To Replace:1. Insert both hanger arms into the door.2. Open the oven door.You should hear a "click" as the door is set into place.3. Move the latches back to the locked position. Check that thedoor is free to open and close. If it is not, repeat the removaland installation procedures.28