Jenn-Air PRO-STYLE JGRP430WP01 Installation Instructions Manual

Also see for PRO-STYLE JGRP430WP01: Use & care guide

Contents

6. Turn over the gas pressure regulator cap and reinstall on theregulator so that the hollow end faces out and the letters "LP"are visible.//- • ........... --- . ....................7.8.Tighten the gas pressure regulator cap by using a large flat-blade screwdriver, turning the regulator cap clockwise.Test the gas pressure regulator and gas supply line.The regulator must be checked at a minimum 1" (2.5 cm)water column above the set pressure. The inlet pressure tothe regulator should be as follows for operation and checkingthe regulator setting:LP Gas:Minimum pressure 11" (27.9 cm) WCPMaximum pressure 14" (35.6 cm) WCP.Gas Supply Pressure TestingGas supply pressure for testing regulator must be at least1" water column pressure above the manifold pressureshown on the model/serial rating plate.Line pressure testing above 1/2psi gauge (14" WCP)The range and its individual shutoff valve must bedisconnected from the gas supply piping system during anypressure testing of that system at test pressures in excess of1/2psi (3.5 kPa).Line pressure testing at 1/2psi gauge (14" WOP) or lowerThe range must be isolated from the gas supply pipingsystem by closing its individual manual shutoff valve duringany pressure testing of the gas supply piping system at testpressures equal to or less than 1/2psi (3.5 kPa).To Convert Oven Bake Burner (30" [76.2 cm] and 36"[91.4 cm] models and the Right Oven Cavity on 48"[121.9 cm] models)1. Remove oven racks and the extendable roller rack frominside the oven cavity. See the "Extendable Roller Rack"section in the Use and Care Guide.Excessive Weight HazardUse two or more people to move and install ovendoors.Failure to do so can result in back or other injury.2. Remove the oven door. See the "Oven Door" section in theUse and Care Guide.3. Slide the bake burner cover to the right or left.A /A. Bake burner cover4. Lift up and remove oven bake burner cover and set aside.5. Unscrew oven baffle nuts and remove oven baffle. Set aside.6.A BA. Oven baffleB. Oven baffle nutsRemove the oven bake burner screws and oven bake burnerand gently set aside.D CA. Oven bake burner screwsB. Oven bake burnerC. Oven bake burner electrode bracketD. Oven bake burner electrode14