9Product DimensionsIMPORTANT:■ The depth from the front face of the doors to the back of therefrigerator cabinet is 24" (60.96 cm) without panels.■ The power cord is 84" (213 cm) long.■ The water supply connection is made at the bottom front ofthe refrigerator.Top ViewFront View■ Width dimensions were measured from hinge to hinge.■ When leveling legs are fully extended to 1¹⁄₄" (3.2 cm) belowrollers, add 1¹⁄₄" (3.2 cm) to the height dimensions.Tipping RadiusBe sure there is adequate ceiling height to stand the refrigeratorupright when it is moved into place.■ The dolly wheel height must be added to the tipping radiuswhen a dolly is used.Side Tipping RadiusThe side tipping radius varies depending upon the width of themodel. Use the chart provided to determine the side tippingradius.NOTE: Tip on side only.Door Swing DimensionsThe location must permit both doors to open to a minimum of90°. Allow 4¹⁄₂" (11.4 cm) minimum space between the side of therefrigerator and a corner wall.NOTE: More clearance may be required if you are using woodoverlay panels, custom handles, or extended handles.Model A42 41³⁄₄" (106 cm)48 47³⁄₄" (121.3 cm)Model Width A (hinge edge to hinge edge)42 41³⁄₄" (106 cm)48 47³⁄₄" (121.3 cm)A24"(61.0 cm)*83³⁄₈"(211.8 cm)A(see chart following)Model Tipping Radius A424891³⁄₈" (232.1 cm)94³⁄₈" (239.7 cm)Model A B C D42 40³⁄₄"(103.5 cm)39³⁄₄"(101.0 cm)45³⁄₈"(115.3 cm)46³⁄₄"(118.8 cm)48 43¹⁄₄"(109.9 cm)42"(106.7 cm)48⁵⁄₈"(123.5 cm)50¹⁄₄"(127.6 cm)A90˚110˚110˚90˚BA C D