Jensen MP6211 Instruction Manual

Also see for MP6211 - Radio / CD: Quick start guide

Jensen MP6211 Instruction Manual Manual pdf 13 page image

MP62119TUNER OPERATIONThe MP6211 comes equipped with a World Tuner, allowing you to receive channels in USA,EUROPE, LATIN, & OIRT (Russia). See “Frequency Spacing” on page 7 to learn how tochange the World Tuner options.Select a BandPress BAND (19) to change between three FM bands and two AM bands. Each band stores upto six preset stations.TuningManual TuningPress the Up Tuning (10) or Down Tuning (11) button for more than three seconds to entermanual tuning mode, then press the Up Tuning or Down Tuning buttons to move the radiofrequency number up or down one step.Auto Seek TuningPress the Up Tuning (10) or Down Tuning (11) button for less than three seconds to move tonext station automatically.ScanPress SCAN (20) to scan through strong stations in the current band. The radio pauses for fiveseconds at each strong station. Press SCAN again to listen to the current station.Preset StationsUp to six stations on each band can be stored as presets and can then be instantly recalled bypressing the associated preset button (12-17). To store a station, turn the radio on and selectthe desired band and station. Press and hold the desired preset button (numbered one throughsix on the face of the radio) for more than two seconds. When stored, the preset number willappear in the display. The station is now stored and can be re-called at any time by pressingthe corresponding preset button. Repeat for the remaining five presets on the current band andfor all presets on the other three bands.Automatically Store / Preset Scan (AS/PS)Automatically StoreSelect six strong stations and store them in the current band using the Automatic Store feature.To enable this feature, press and hold AS/PS (21) for more than two seconds. The radio willautomatically scan the band in use and enter strong stations into the preset memory positionsfor that band. After entering the stations into memory, the unit will automatically stop at eachstation for five seconds so each can be heard. When using the Automatically Store feature, thenew stations replace any stations already stored in preset memory for the selected band.Preset ScanPress AS/PS (21) to scan the six preset stations in the current band. The unit will stop at eachstation for five seconds before continuing to the next preset station, and the preset number willflash on the display during the preset scan. Press AS/PS again to stop scanning and listen tothe current station.StereoThe unit will automatically pick up a stereo signal, when available. When in stereo mode, the“ST” icon (18) appears in the display. When no stereo signal is available, the unit willautomatically revert to mono operation, and no icon will be displayed.PRESS AND HOLDPRESET NUMBER APPEARS