Jensen MP6211 Instruction Manual

Also see for MP6211 - Radio / CD: Quick start guide

Jensen MP6211 Instruction Manual Manual pdf 17 page image

MP621113CD CHANGER OPERATIONPlease call Jensen technical support at 1-800-323-4815 for a complete list of CD changerscompatible with this unit. The following Jensen CD Changers are compatible with this unit:JCH10RF and CH1001.After the CD changer has been installed and properly connected, press the Reset button (24)to initialize the installation. Refer to the owner’s manual included with the CD changer forinstructions on installing, loading and using the CD magazine.CD Changer ModePress MODE (2) during tuner or disc play to select operation of the CD changer. Disc play willbegin, and the disc and track numbers will be shown in the display. If a new magazine hasbeen loaded into the changer, play will begin from the first track of the first disc. If a magazinewas already in the changer, play will resume where it last ended.Disc SelectTo select the desired disc for play, press UP (17) to advance to a higher disc or DN (16) tomove back to a lower disc. The number of the disc in play will appear on the display.Other FeaturesDuring CD changer play, the Pause, Repeat, Random, Intro Scan and Track Select featuresare accessed using the same methods as for regular disc play. Refer to the CD PlayerOperation section of this manual for details.JPORT OPERATIONAfter the JPORT has been installed and connected, press the RESET button (24) to initializethe installation. The JPORT can be used to control your iPod or an optional CD Changer.Refer to the owner’s manual included with the JPORT for instructions regarding theoperation of external devices attached to your JPORT.