Jensen MS4200RS User's Manual & Installation Instructions

Also see for MS4200RS - Navigation System With CD Player: Quick start guide

Jensen MS4200RS User's Manual & Installation Instructions Manual pdf 14 page image

The system has the following safety functions to prevent theft:Removable operating panelTake the removable operating panel with you, whenever you leave the vehicle. Keepthe panel in its protective case. Always replace the operating panel before driving off.When the front is opened, acoustic signals will sound (independent of the presence ofthe removable operating panel).Removing the operating panel1. Open the front by pressing the release button.2. Pull the operating panel from its metal bracket.3. Push the metal bracket back up.Re-inserting control panel1. Insert the operating panel with the right or the left side first.2. Push the operating panel until it snaps into place.To ensure a good connection between the device and the operating panelwe recommend that you clean the contacts occasionally with a cotton swab.Security codeThe navigation radio can be protected against theft with a security code. The unit isdisabled as soon as it is disconnected from the voltage supply (e.g. if it is stolen). It canonly be reactivated by entering the correct code.The security code can be activated/deactivated and changed. For further informationsee “INITIALIZATION”, option “Security Code” ➽ page 31.Anti-theft protection LEDWhen the navigation radio is switched off and the ignition key removed, a red anti-theft LED will flash on the front of the unit if the operating panel is removed.The anti-theft LED is linked to the security code. It will not flash if the security codehas been deactivated.CAUTION:A For reasons of safety please ensure that the removable operating panel is always flippedup (closed) when driving.SAFETY11