Jensen MS4200RS User's Manual & Installation Instructions

Also see for MS4200RS - Navigation System With CD Player: Quick start guide

Jensen MS4200RS User's Manual & Installation Instructions Manual pdf 24 page image

The “SOUND” menuIn the “SOUND” menu, you can set your navigationradio’s sound and several other sound reproductionparameters to your own preferences.The sound settings for bass and treble/tone are valid forthe currently active sound source (radio, CD or CDC). Press the SOUND button.: The “SOUND” menu is displayed.The following options are available:Sound settings Set the desired option with cursor button 8 or 2. Move the slide control to the desired option usingcursor buttons 4 and 6.✎ The entered value will be stored automatically.– Bass: Setting the bass (low tones).– Treble: Setting the treble (high tones).– Bal.: Setting of volume balanceleft <–> right.– Fader: Setting the volume distribution rear <–> front.Slide control left: rearSlide control right: front✎ Sound settings cannot be performed for navigation information, trafficannouncements and telephone operation.Loudness Activate this function to increase low and high tones at low volume settings.✎ Selecting one of the pre-set sound styles deactivates the loudness function.Sound Style Select one of the pre-set sound styles. Select “User” to retain your own bass and treble settings.✎ For each sound source, the sound style is stored separately.SDVC (speed-dependent volume control)To compensate for environmental noise, the volume for audible information increasesas a function of the speed. Choose a setting for the speed-dependent increase of the volume. Select OFF to deactivate the function or 1 ... 5 to choose the desired volumeincrease. 1 is the lowest, 5 the highest volume increase.21SOUND SETTINGSSOUNDSound SettingsLoudnessSound StyleSDVC: 2SOUND SETTINGSBassTrebleBalanceFader