Jensen VM9411 Instruction Manual

Also see for VM9411: Instruction manual Instruction manual

Contents

19VM9411AM/FM TUNER OPERATIONTuner TFT DisplayDefault TFT Tuner Display1. Current Radio Band Indicator2. Radio Frequency Indicator3. Clock4. Stereo Broadcasting Indicator5. Local Indicator6. Preset Radio Stations7. Front Zone Playing Mode8. Rear Zone Playing Mode9. User Defined Equalizer Level10. Loud Setting Indicator11. Current Preset Station IndicatorAlternate TFT Tuner DisplayThe VM9411 offers an alternate display for the AM / FM tunerinterface that is less bright than the default tuner display andis more appropriate for night driving.To activate this feature, open the TFT screen and then pressand hold the DISP button (5) for more than one second. Todeactivate, press and hold the DISP button again.Tuner LCD Display1. Current Radio Band Indicator2. Radio Frequency Indicator3. Current Preset Station Indicator4. Stereo Broadcasting Indicator5. Strong Local Signal Broadcasting IndicatorSwitch to Radio Tuner sourcePress the SRC button (15) on the front panel or remotecontrol (8) to switch to the RADIO TUNER source. The TunerTFT or LCD display appears.Select FM/AM BandPress the BAND button (14) on the front panel or the remotecontrol (20) to change between the following bands: FM1,FM2, FM3, AM1, and AM2.Seek TuningPress the >>| button (19) on remote control or the > button onthe joystick (17) to seek the next station higher.Press the |<< button (17) on the remote control or the <button on the joystick (16) to seek the next station lower.Manual TuningPress the /\ or V buttons (18, 19) on the joystick to increaseor decrease the tuning frequency one step.Using Preset StationsSix numbered preset buttons store and recall stations foreach band. All six stored stations (P1-P6) for the currentband appear on the TFT screen.Storing a Station1. Select a band (if needed), then select a station.2. Hold a preset button (8-13) for three seconds. Thepreset number appears in the LCD panel.Recalling a Station1. Select a band (if needed).2. Press a preset button (8-13) to select the correspondingstored station.Auto Store (AS)To select six strong stations and store them in the currentband:1. Select a band (if needed).2. Press the AS button (26) on the unit to activate the AutoStore function.The new stations replace stations already stored in that band.Local Radio Station Seeking (LOC)When the Local function is on, only radio stations with astrong radio signal are played. To activate the Local function,press and hold the LO/DX button (6) on the front panel whilethe yellow volume bar IS NOT displayed. Press and hold LO/DX again to turn Local off. When the Local function is active,the “LOC” indicator appears lit on the LCD or TFT screen.ST LocP14 1101011 2 57 8 9 361 2 3 4 5