Jet GH-1340W Owner's Manual
Also see for GH-1340W: Parts list
                        | |
9Lubrication CAUTIONLathe must be serviced at all lubricationpoints and all reservoirs filled to operatinglevel before the lathe is put into service!Failure to comply may cause seriousdamage to the lathe!1. Headstock - Oil must be up to indicatormark in oil sight glass (A, Fig. 3). Top offwith Mobil DTE Oil Heavy Medium. Fillby pulling plug (D, Fig. 3). To drain,remove drain plug (A, Fig. 4) with an 8mmhex wrench. Drain oil completely and refillafter the first month of operation. Cleanout any metal shavings. Then, change oilin the headstock annually.2. Gearbox - Oil must be up to indicatormark in oil sight glass (B, Fig. 3). Top offwith Mobil DTE Oil Heavy Medium. Fillby lifting off thread chart cover (E, Fig. 3)and remove plug (C, Fig. 3) with an 8mmhex wrench. To drain, remove drain plug(A, Fig. 5) with an 8mm hex wrench. Drainoil completely and refill after the firstmonth of operation. Then, change oil inthe Gearbox annually. |
Related manuals for Jet GH-1340W
manualsdatabase
Your AI-powered manual search engine