Jet JJ-6CSDX Operating Instructions And Parts Manual

Also see for JJ-6CSDX: Operating instructions and parts manual Specifications Operating instructions and parts manual

22Operating Controls1. Hand Wheel for Outfeed Table2. Outfeed Table3. Fence4. Fence Adjustment Handle5. Cutter Guard6. Infeed Table7. Hand Wheel for Infeed Table8. On/Off SwitchOperationImportant: If you are inexperienced at jointing, usescrap pieces of lumber to check settings and getthe feel of operations before attempting regularwork.Stabilize long workpieces by using an assistant, orroller stands set level with the outfeed or infeedtable surface.The fence should be adjusted to create minimumexposure to the cutterhead during the jointingoperation.9. Table Lock Knob10. Fence Tilt Lock Handle11. Belt Guard12. Fence Travel Lock Handle13. Depth LimiterCheck the following before operating the jointer: Outfeed table must be set level with the highpoint of the knives or knife inserts. Fence adjusted for minimum exposure ofcutterhead, and locked at desired angle. The cutterhead guard must be in place andoperating properly (except when rabbeting). Infeed table set for desired depth of cut. Stand away from the cutterhead and turn themachine on for a few moments. Listen for anyodd noises, rubbings, vibrations, etc. Correctsuch problems before attempting operations onthe jointer. Carefully check your workpiece for knots, holes,staples or any foreign material that mightdamage knives or pose a risk of kickback. Alsocheck the workpiece for grain orientation.