Jet JVM-836 Operator's Manual

Also see for JVM-836: Operating instructions and parts manual Operator's manual

Contents

Jet JVM-836 Operator's Manual Manual pdf 3 page image

it WARNING1. Read and understand the entireinstruction manual before attemptingset-up or operation of this machine.2. Always wear approved safetyglasses/face shields while using thismachine.3. Make certain the machine is properlygrounded.4. Before operating the machine, removetie, rings, watches, other jewelry, and rollup sleeves above the elbows. Removeall loose clothing and confine long hair.Do not wear gloves.5. Keep the floor around the machine cleanand free of scrap material, oil andgrease.6. Keep machine guards in place at alltimes when the machine is in use. Ifremoved for maintenance purposes, useextreme caution and replace the guardsimmediately.7. Do not over reach. Maintain a balancedstance at all times so that you do not fallor lean against blades or other movingparts.8. Make all machine adjustments ormaintenance with the machineunplugged from the power source.9. Use the right tool. Don't force a tool orattachment to do a job which it was notdesigned for.10. Replace warning labels if they becomeobscured or removed.11. Make certain the motor switch is in theOFF position before connecting themachine to the power supply.12. Give your work undivided attention.Looking around, carrying on aconversation, and "horse-play" arecareless acts that can result in seriousinjury.13. Keep visitors a safe distance from thework area.14. Use recommended accessories;improper accessories may behazardous.15. Keep hands away from all moving parts(belts, cutters, gears, etc.).16. Never operate this machine under theinfluence of alcohol or drugs.17. Read and understand all warningsposted on the machine.18. This manual is intended to familiarize youwith the technical aspects of this millingmachine. It is not, nor was it intended tobe, a training manual.19. This machine is designed and intendedfor use by properly trained andexperienced personnel only. If you arenot familiar with the proper safe use ofmilling machines, do not use thismachine until proper training andknowledge has been obtained.20. Failure to comply with all of thesewarnings may cause serious injury.2