Jet JWBS-20 Operating Instructions Manual

Also see for JWBS-15: Operating instructions and parts manual Operating instructions

Contents

Jet JWBS-20 Operating Instructions Manual Manual pdf 5 page image

Never leave a running machine unattended. Before you leavethe workplace switch off the machine.Do not operate the electric tool near inflammable liquids orgases.Observe the fire fighting and fire alert options, for examplethe fire extinguisher operation and place.Do not use the machine in a dump environment and do notexpose it to rain.Wood dust is explosive and can also represent a risk tohealth.Dust form some tropical woods in particular, and fromhardwoods like beach and oak, is classified as a carcinogenicsubstance.Always use a suitable dust extraction deviceBefore machining, remove any nails and other foreign bodiesfrom the workpiece.Use a push block when working the ends of narrow stock.Always store the push stick or the push wood handle with themachine, also when not in use.Specifications regarding the maximum or minimum size of theworkpiece must be observed.Do not remove chips and workpiece parts until the machine isat a complete standstill.Never operate with the guards not in place – serious risk ofinjury!Do not stand on the machine.Connection and repair work on the electrical installation maybe carried out by a qualified electrician only.Have a damaged or worn cord replaced immediately.Make all machine adjustments or maintenance with themachine unplugged from the power source.Remove defective sawblades immediately.3.3 Remaining hazardsWhen using the machine according to regulations someremaining hazards may still existThe moving sawblade in the work area can cause injury.Broken saw blades can cause injuries.Thrown workpieces can lead to injuryWood chips and sawdust can be health hazards. Be sure towear personal protection gear such as safety goggles ear- anddust protection.Use a suitable dust exhaust system.The use of incorrect mains supply or a damaged power cordcan lead to injuries caused by electricity.4. Machine specifications4.1 Machine DescriptionFig 11…Blade tracking window2…Blade tension lever3…Door catch4…Height adjust hand wheel5…Guide post6…Upper blade guides7…Mitre gauge8…Cast iron table9…Dust port10…Lower wheel cover11…Fence support rail12…Fence13…On/Off magnetic switch14…Warning label15…Blade tension window16…Blade tension hand wheel17…Upper wheel cover18…Lifting ring