Jet JWBS-20 Operating Instructions Manual

Also see for JWBS-15: Operating instructions and parts manual Operating instructions

Contents

Jet JWBS-20 Operating Instructions Manual Manual pdf 7 page image

4.4 Dust emissionThe band saw has been dust emission inspected.At an air velocity of 20 m/s on the dust port dia 100mm:Vacuum pressure 1250 PaVolume flow 565 m³/hThe machine meets a workplace dust emission of 2 mg/m³.4.5 Content of deliveryBand sawFence body – AFence profile – BTable – CTable insert – DGuide rail – ELifting ring – FHand wheel with handle – GMitre gauge – HSaw bladeOperating manualSpare parts listHardware package containing:2x Socket head screws – HP12x Flat washers – HP24x Hex cap screws – HP34x Lock washers – HP44x Flat washers – HP51x Table slot handle assembly – HP6Fig 25. Transport and start up5.1 Transport and installationThe machine will be delivered on an open crate.For transport use a forklift or hand trolley. Make sure themachine does not tip or fall off during transport.The machine is designed to operate in closed rooms and mustbe placed on firm and levelled ground.The machine can be bolted down if required (Fig 3).