Jet JWBS-9X Operating Instructions Manual

Also see for JWBS-9X: Operating instructions

Contents

Jet JWBS-9X Operating Instructions Manual Manual pdf 3 page image

3GB - ENGLISHOperating InstructionsDear Customer,Many thanks for the confidence you have shown in us with the purchase of your new JET-machine. This manual has been prepared forthe owner and operators of a JET JWBS-9X band saw to promote safety during installation, operation and maintenance procedures.Please read and understand the information contained in these operating instructions and the accompanying documents. To obtainmaximum life and efficiency from your machine, and to use the machine safely, read this manual thoroughly and follow instructionscarefully.…Table of Contents1. Declaration of conformity2. Warranty3. SafetyAuthorized useGeneral safety notesRemaining hazards4. Machine specificationsTechnical dataNoise emissionContents of delivery Machinedescription5. Transport and start upTransport and installationAssemblyMains connectionDust connectionStarting operation6. Machine operation7. Setup and adjustmentsChanging the saw bladeBlade tracking adjustmentBlade guide adjustmentFolding the bandsaw bladeMitre gauge setup Tilting ofmachine table8. Maintenance and inspection9. Troubleshooting10. Environmental protection11. Available accessories12. „safe operation”................. appendix A1. Declaration of conformityOn our own responsibility we herebydeclare that this product complies withthe regulations* listed on page 2.Designed in consideration with thestandards**. CE type examination***performed by****.2. WarrantyJPW (Tool) AG guarantees that thesupplied product(s) is/are free frommaterial defects and manufacturing faults.This warranty does not cover any defectswhich are caused, either directly orindirectly, by incorrect use, carelessness,damage due to accidents, repairs orinadequate maintenance or cleaning aswell as normal wear and tear.Further details on warranty (e.g. warrantyperiod) can be found in the General Termsand Conditions (GTC) that are anintegral part of the contract.These GTC may be viewed on the websiteof your dealer or sent to you uponrequest.JPW (Tool) AG reserves the right to makechanges to the product and accessories atany time.3. Safety3.1 Authorized useThis machine is designed for sawing wood,wood derived materials as well as similarto be machined hard plastics only.Machining of other materials is notpermitted and may be carried out inspecific cases only after consulting withthe manufacturer.No metal workpieces may be machined.The workpiece must allow to safely beloaded, supported and guided.The proper use also includes compliancewith the operating and maintenanceinstructions given in this manual.The machine must be operated only bypersons familiar with its operation andmaintenance and who are familiar with itshazards.The required minimum age must beobservedThe machine must only be used in atechnically perfect conditionWhen working on the machine, all safetymechanisms and covers must bemounted.In addition to the safety requirementscontained in these operating instructionsand your country’s applicable regulations,you should observe the generallyrecognized technical rules concerning theoperation of woodworking machines.Any other use exceeds authorization.In the event of unauthorized use of themachine, the manufacturer renounces allliability and the responsibility istransferred exclusively to the operator.3.2 General safety notesWoodworking machines can be dangerousif not used properly. Therefore theappropriate general technical rules as wellas the following notes must be observed.Read and understand the entireinstruction manual before attemptingassembly or operation.Keep this operating instruction close bythe machine, protected from dirt andhumidity, and pass it over to the newowner if you part with the tool.No changes to the machine may be made.Daily inspect the function and existence ofthe safety appliances before you start themachine.Do not attempt operation in this case,protect the machine by unplugging themains cord.Remove all loose clothing and confinelong hair.Before operating the machine, remove tie,rings, watches, other jewellery, and roll upsleeves above the elbows.Wear safety shoes; never wear leisureshoes or sandals.