Kärcher HD 13/35 PE Instructions Manual

– 8 Screw off water supply hose and highpressure hose. Blow through machine with com-pressed air.NoteObserve handling instructions of the anti-freeze agent manufacturer. Pump in conventional frost protectionagents through the appliance.A certain corrosion protection is achievedwith this as well.CautionRisk of injury and damage! Observe the weightof the appliance when you transport it. Push the push handle down and pushthe appliance. When transporting in vehicles, securethe appliance according to the guide-lines from slipping and tipping over. Connect the lifting device in the centerof the strut to load by crane. DangerRisk of injury due to machine dropping.– Check the strut for crane loading for dam-age prior to each transport by crane.– Only lift up the appliance by the strut whenloading by crane.– Protect the lifting device from inadvertentload release.– Remove the spray pipe with hand spraygun prior to transporting by crane.– The appliance must only be transported byproperly trained crane personnel.– Do stand stand below the load.– Ensure that no persons are present inthe immediate vicinity of the crane.– Do not leave the appliance on the craneunattended.CautionRisk of injury and damage! Note the weightof the appliance in case of storage.This appliance must only be stored in inte-rior rooms. DangerObserve the safety notes in the engine op-erating instructions prior to any care andmaintenance work. DangerRisk of injury if the machine is left running in anunattended state. Remove the spark plug be-fore doing any work on the appliance.Risk of burns! Do not touch hot silencers,cylinders or radiator ribs.Carry out maintenance tasks to the engineaccording to the specifications provided inthe operating instructions of the enginemanufacturer.You can sign with your dealer a contract forregular safety inspection or even sign amaintenance contract.Please take advice on this matter. Check oil level of the engine. Check oil level from the oil level displayof the gears. Check oil level from the oil level display ofthe high pressure pump.Please contact Customer Service immedi-ately if the oil is milky (water in oil). Check the high pressure hose for damages(risk of bursting).Please arrange for the immediate ex-change of a damaged high-pressure hose. Check appliance (pump) for leaks.3 drops per minute are permitted andcan come out from the lower side of theappliance. Call Customer Service ifthere is heavy leakage.Drain waterFlush device with anti-freeze agentTransportDrivingTransport by craneStorageMaintenance and careMaintenanceSafety inspection/ maintenance contractBefore each use22 EN