Kärcher HD 13/35 PE Instructions Manual

– 9 Clean filter at the water connection. Check tire pressure of wheels (refer to"Specifications"). Replace engine oil. Change oil in the pump. Clean air filter in the engine. Replace engine oil. Check and clean the spark plug. Check fuel filter. Replace engine oil filter. Check/adjust the tappet clearance. Replace the spark plug. Replace engine oil filter insert. Change fuel filter.Change the oil and high pressure pump: For oil type refer to technical specifications. Turn out the oil drain screw. Drain the oil in a collection basin. Screw in oil drain plug. Fill in new oil slowly until the centre ofthe oil level display.NoteAir pockets must be able to leak out.Change gear oil: For oil type refer to technical specifica-tions. Turn out the oil drain screw. Drain the oil in a collection basin. Screw in oil drain plug. Fill in new oil slowly until the centre ofthe oil level display. Clean fuel tank. Check the fuel hose.You can rectify minor faults yourself withthe help of the following overview.If in doubt, please consult the authorizedcustomer service. DangerObserve the safety notes in the engine op-erating instructions prior to any care andmaintenance work. DangerRisk of injury if the machine is left running in anunattended state. Remove the spark plug be-fore doing any work on the appliance.Risk of burns! Do not touch hot silencers,cylinders or radiator ribs. WarningRepair work on the appliance may only beperformed by the authorized customer ser-vice. Follow operating instructions of the en-gine manufacturer!– The water shortage fuse (option) was trig-gered due to low water inlet pressure. Check water inlet pressure, minimumvalue see "Specifications".– Operating speed of the engine is too low Check operating speed of the engine(refer to technical data).– Wrong nozzle Check nozzle for correct size (see tech-nical specifications).– Flushed the nozzle. Clean/ replace nozzle.– Filter is dirty. Clean filter at the water connection.Unscrew the filter casing, remove thefilter, clean it and replace it.– Air within the system Appliance ventilation:Unscrew the nozzle. Switch on the ap-pliance and let it run until the water ex-WeeklyIn the first month or after 20 operatinghoursAfter 50 operating hoursEvery 50 operating hoursEvery 100 operating hoursEvery 200 operating hoursEvery 300 operating hoursAnnually or every 500 operating hoursEvery 2 yearsTroubleshootingAppliance is not runningDevice is not building up pressure23EN