Kärcher HDS 4.0/32 Pe Cage Operator's Manual

Also see for HDS 4.0/32 Pe Cage: Manual

Contents

9.800-103.0 • REV. 1/07OPERATOR’S MANUAL PRESSURE WASHER6COMPONENT IDENTIfICATIONPump — Delivers a specific gpm to the high pressurenozzle which develops pressure.Spray gun — Controls the application of water anddetergent onto cleaning surface with trigger device.Includes safety latch.Unloader valve— Safety device which allows pres-sure to be released when spray gun is closed.High Pressure Hose — Connect one end to waterpump discharge nipple and the other end to spraygun.Adjustable Thermostat — Safety control whichprevents temperatures from going above adjustablesetting.Wand — Must be connected to the spray gun.Note: If trigger on spray gun is released for more than2 minutes, water will leak from valve. Warm water willdischarge from pump protector onto floor. This systemprevents internal pump damage.HighPressureHoseWater Supply(Not Included)float TankSpray gunEngine fuelTankburner fuelTankEngineWandburnerbattery boxWater InletAdjustableThermostatPumpUnloadervalve