English 5.906-736.0 Rev. 00 (07/15) 1591 Connecting cable2 Starter3 Nut Disconnect battery. Disconnect the earth connection and the connectioncable from the starter. Open the nuts, remove the starter. Install and electrically connect new starter.Mind the cable run! Connect the battery.NOTEOnly trained personnel is permitted to add motor, gear andpump oil.Check the oil level while the engine is warm.Align the appliance horizontally prior to checking the oillevel in order not to get a false result. CAUTIONRisk of damage!When filling the motor oil make sure that no oil lands on hotmotor surfaces. Increased risk of fire!1 Upper cover filling hole2 Oil dipstick Remove the oil dip, wipe it and reinsert it. Remove the oil dip one more time and check the oil level.The oil level is correct if it is within the markings on theoil dip. If the oil level is below the mark on the dipstick, open theupper cover of the filling hole and fill in fresh motor oil. Wait five minutes, until the oil has collected in the oil pan. Check the oil level as described above. Repeat this procedure as often as necessary until theoil level is between the markings on the oil dip. After the check, insert the dipstick and close the uppercover of the filling hole.NOTEAir pockets must be able to leak out.11.15.5 Replacing the starter11.15.6 Check the oil level on the motor / refill motor oilOil gradeDiesel engine 15 W40
