Kärcher Landa VLP Series Operator's Manual

Contents

Kärcher Landa VLP Series Operator's Manual Manual pdf 17 page image

17OperationsAssembly InstructionsSTEP 1: Attach the high pressurehose to the spray gun using teflontape on hose threads. Move safetylatch into locked position to preventspray gun trigger from activating.STEP 4: Connect the garden hoseto pump water inlet. Inspect inlets.CAUTION: Do not run the pumpwithout water or pump damagewill result.STEP 2: Connect the high pressurehose to the discharge fitting. Pushcoupler collar forward until secure.STEP 5: Before installing nozzle,turn on the water supply and runmachine allowing water to run fromthe end of the wand until clear. Turnoff machine. Check for water leaksand tighten as needed.STEP 3: Connect garden hose tothe cold water source.STEP 6: Pull the spring-loadedcollar of the wand coupler back toinsert pressure nozzle. Release thecoupler collar and push the nozzleuntil the collar clicks. Pull thenozzle to make sure it is seatedproperly.SafetySwitchSprayGunHigh PressureHoseLanda VNG Operator’s Manual 8.913-939.0 - ABPumpDischargeFittingHighPressureHoseColdWaterSourceGardenHose98015100-8PumpWater InletGardenHosePressureNozzleWandCouplerCouplerCollar