– 8 Activate hand spray gun until de-vice is pressure less. Secure the trigger gun. To do so,push the safety catch towards thefront. Place the spray lance with the trig-ger gun into the quiver for the spraylance and snap it into place in thespray lance holder. Wind the connection cable aroundthe cable holder. Fasten the plug with the mountedclip. Slide in push handle. Wind up the high-pressure hoseand hang it over the hose storage.ATTENTIONFrost will destroy the not completelywater drained device.Store the appliance in a frost free area. Drain water. Pump in conventional frost protec-tion agents through the appliance.Note:Use normal glycol-based anti-freezingagents for automobiles.Observe handling instructions of theanti-freeze agent manufacturer. Operate device for max. 1 minuteuntil the pump and conduits areempty. CAUTIONRisk of injury and damage! Observethe weight of the appliance when youtransport it.ATTENTIONProtect the trigger from damage duringtransport. Hold the appliance at the carryinghandle and the recessed grip forcarrying it. When transporting in vehicles, se-cure the appliance according to theguidelines from slipping and tippingover. For transport over longer distances,pull out the push handle to the endposition and drag the appliance be-hind you holding the push handle. In order to climb stairs, pull the ap-pliance up step by step. The skidsprotect the casing from damage. Attach the connecting piece of thesurface cleaner to the holder on thehigh-pressure cleaner. Screw union nut. Attach the lifting device to the carry-ing handle of the appliance. DANGERRisk of injury due to machine dropping.– Adhere to the local accident pre-vention guidelines and safetynotes.– Check the carrying handle for dam-age prior to every transportation bycrane.– Check the lifting unit for damageprior to each transport by crane.Storing the ApplianceFrost protectionIf you cannot store it in a frost-freeplace:TransportHolder for surface cleanerTransport by craneSafety information about cranes10 EN