Kärcher ProHD G 600 Operator's Manual

English 5CAUTIONWhen connecting to water supply mains,local regulations of your municipal watercompany must be observed. In some ar-eas connecting directly to public drinkingwater supply may require a backflow pre-vention device. This is to ensure that thereis no feedback of chemicals into the watersupply. Use a water filter to avoid potentialdamage from dirt in the water supply.■ Garden hose must be at least 5/8 inchdiameter.■ Flow rate of water supply must not fallbelow 4.0 GPM (gallons per minute)■ Flow rate can be determined by runningthe water for one minute into an empty5-gallon container.■ The water supply temperature must notexceed 122°F/50°C.■ Never use the pressure washer to drawin water contaminated with solvents, e.g.paint thinners, gasoline, oil, etc.■ Always prevent debris from being drawninto the unit by using a clean water source.Use additional water fi lter.■ Do not operate pressure washer withoutthe water turned on.Hardware (included)Description Purpose Illustration QtyA Knob Joint Assembly 2B 5/16" X 1 3/4BoltJoint Assembly 2C 5/16" X 2" Bolt Hose Holder Assembly 1D Hose Holder Hose Holder Assembly 1E High PressureHoseSpray Gun Assembly 1ASSEMBLY INSTRUCTIONSWATER SUPPLY (Cold Water Only)