Kärcher ProHD G 600 Operator's Manual

English 9Detergents can only be applied with theblack detergent nozzle.STEP 1:Install the black detergent nozzle for de-tergent application at low pressure.STEP 2:Set remote pressure control knob to thehigh fl ow position "+"STEP 3:Fill a container with Kärcher detergent.Place the fi lter end of detergent suctiontube into the container.STEP 1:Move the engine stop switch to the OFFposition.STEP 2:Release trigger and engage safety lock.For engine details see engine manual.DetergentsTAKING A BREAK ...fi ve minutes or moreWORKING WITH DETERGENTSCAUTIONThis unit has been designed for use withcleaning detergents recommended by themanufacturer.The use of other cleaning detergent may af-fect the operation of the machine and voidthe warranty.Always Use Kärcher Detergent for BestResultsKärcher biodegradable detergents are spe-cially formulated to protect the environmentand your pressure washer. The special for-mula won`t clog the suction tube filter andwill protect the internal parts of the pressurewasher for a longer life. For Kärcher Deter-gents, check your retailer or visit our website:karcher.com/usCAUTIONNever use:– Bleach, chlorine products or other cor-rosive chemicals– Liquids containing solvents (i.e., paintthinners, gasoline, oils.)– Tri-sodium phosphate products– Ammonia products– Acid-based productsThese chemicals will harm the unit and willdamage the surface being cleaned.Use of these items will void the warranty.STEP 4:With the engine running, pull trigger tooperate unit.Liquid detergent is drawn into the unit andmixed with water.Apply detergent to work area.Do not allow detergent to dry on surface.STEP 5:Always draw fresh water through the de-tergent suction tube when the cleaningjob is done, to rinse/fl ush any remainingdetergents from the injection system.For best results see Cleaning Tips forspecific information on how to clean dif-ferent surfaces.