KEB COMBIVERT F5 Instructions For Use Manual

Also see for COMBIVERT F5: INSTALLATION GUIDELINE Installation manual Instruction manual Instruction manual Installation manual

Contents

ID: Fb28Name: 1st PDOUT mapMeaning Specifies the PDOUT mapping. The parameter is set-programmable.Parameter number (PNU): 029ChSubindex: SubindexMeaningBit-coded LinearFBS Config.Bit6 = 0 FBS Config.Bit6 = 10 0 addressed the 1th mapping1 1 addressed the 1th mapping2 2 addressed the 2nd mapping4 3 addressed the 3rd mapping8 4 addressed the 4th mapping16 5 addressed the 5th mapping32 6 addressed the 6th mapping64 7 addressed the 7th mapping128 8 addressed the 8th mappingData type: Uint32Coding: b31…b24 b23…b16 b15…b8 b7…b0PNU Subindex Bit lengthPnu: Parameter address of the mapped parameterSubindex:Parameter subindex of the mapped parameterSubindex = 0 → Parameter is mapped in set0Subindex = 1 → Parameter is mapped in set0Subindex = 2 → Parameter is mapped in set1Subindex = 3 → Parameter is mapped in set2Subindex = 4 → Parameter is mapped in set3Subindex = 5 → Parameter is mapped in set4Subindex = 6 → Parameter is mapped in set5Subindex = 7 → Parameter is mapped in set6Subindex = 8 → Parameter is mapped in set7Multiple mappings are not possible.Bit length: The mapped data length in bit, only the values = 16.32 are permis-sible hereStandard value: 0Note: A changed value is immediately stored non-volatile.A changed mapping entryfurthermore causes the shutdown of the corresponding mapping and the set-ting of parameter 1st PDOUT map cout = 0. Gaps are not supported by thisstructure, i.e. there is no way to declare a mapping inactive.55PARAMETER DEScRIPTION