KEB Combivert F5 series Installation Manual

Also see for COMBIVERT F5: INSTALLATION GUIDELINE Installation manual Instruction manual Instruction manual Installation manual

GB - 17*)Setpoint potentiometer3…10 kΩSetpoint signal0…±10 V DCAnalog output±10 V DC /max. 5 mAInstallation and Connection3.5.2 Connection of the control terminal stripCurrent signal0…±20 mA4…20 mAmax. 30 V DC / 0.01…1 Amax. 30 V DC / 0.01…1 ATo avoid interferences a separate shielding must be provided for analog and digital controllines. Depending on the use of the relay outputs, an extra shielding is to be used, too.In case of inductive load on the relay outputs a protective wiring must be provided (e.g.free-wheeling diode)!The terminals of the control terminal strip and the transmitter inputs are securely isolatedin accordance with EN 50178.*) Connect potential equalizing line only if apotential difference of >30 V exists betweenthe controls. The internal resistance is red-uced to 30 kΩ.