KEB Combivert F5 series Installation Manual

Also see for COMBIVERT F5: INSTALLATION GUIDELINE Installation manual Instruction manual Instruction manual Installation manual

GB - 7Product Description2. Product Description2.1 Intended useThe frequency inverter KEB COMBIVERT F5 serves exclusively for the control and regu-lation of three-phase motors. The operation of other electric consumers is prohibited andcan lead to the destruction of the unit.Frequency inverter are components which are intended for the installation in electric sys-tems or machines.2.2 Unit identification14 . F5 . G 1 E - 3 A 0 0CoolingA: Heat sink D: ConvectionB: Flat rearEncoder interface0: noneSwitching frequency; short time current limit;overcurrent limit0: 2 kHz; 125 %; 150 % 6: 8 kHz; 150 %; 180 %4: 2 kHz; 150 %; 180 % A: 8 kHz; 180 %; 216 %5: 4 kHz; 150 %; 180 % B: 16 kHz; 180 %; 216 %Input identification1: 3-phase 230 V AC or DC supply3: 3-phase 400 V AC or DC supplyHousing type EAccessories1: Braking transistorB: such as 1 but with safety relais3: Braking transistor and integrated filterD: such as 3 but with safety relaisControl typeA: APPLICATION 1) G: GENERALB: BASIC 2) H: ASCLC: COMPACT M: MULTIE: SCL S: SERVOSeries F5Inverter size1) At control card APPLICATION without encoder interface see type „GENERAL“, with encoder interface seetype „MULTI“.2) An output frequency of up to 1600 Hz is possible by changing the operating mode at control type "BASIC" (xx-F5Bxx-xxxx). This devices are subject to export authorisation according to entry 3A225 Annex I of the Dual-UseRegulation.