KEF 201 Installation Manual

Also see for Reference 201: Brochure & specs Brochure & specs Brochure & specs Brochure & specs Brochure & specs

72.3 Speaker Placement and Room AcousticsThe listening room is one of the most variable elements in the hi-fi chain and its effect cannot be emphasised too strongly, nor can its effectsbe reliably predicted. Spacing the speakers approximately 2m - 3m (6’ - 10’) apart will allow the stereo images to develop fully. You shouldsit at a distance at least equal to and preferably greater than the distance between the speakers.Positioning the speaker in a corner or near to a side wall is not recommended as the significant bass boost caused by this position will affectthe sound and cause the stereo image to deteriorate. However, placement close to the front wall is catered for in the BoundaryCompensation Device (see later). It is best to place the speakers symmetrically within the room, relative to the walls, ceiling and floor, wherepossible. Be aware also that soft furnishings near to a speaker will deaden the sound - similarly, nearby reflective surfaces may brighten upthe sound. Move the speakers until you are satisfied that the sound is right and that the stereo image is well defined.Like all other KEF Uni-Q® loudspeakers, your Reference Series loudspeakers are designed to be used with little or no ‘toe-in’. However ifrequired a ‘brighter’, or ‘sharper’ sound may be obtained by pointing the speakers directly towards the listening position.