KENT Klenzor 16 MPH Instructions For Use Manual

Also see for 56265004: Parts list

Contents

KENT Klenzor 16 MPH Instructions For Use Manual Manual pdf 3 page image

FORM NO. 56041603 - Klenzor ™ - 1ENGLISH / A-1INTRODUCTIONThis manual will help you get the most from your Kent carpet extractor. Read it thoroughly before operating the machine.This product is intended for commercial use only.PARTS AND SERVICERepairs, when required, should be performed by your Authorized Kent Service Center, who employs factory trained service personnel, and maintainsan inventory of Kent original replacement parts and accessories.Call the KENT DEALER named below for repairs or service. Please specify the Model and Serial Number when discussing your machine.(Dealer, affix service sticker here.)NAMEPLATEThe Model Number and Serial Number of your machine are shown on the Nameplate, located on the rear base of the machine. This information isneeded when ordering repair parts for the machine. Use the space below to note the Model Number and Serial Number of your machine for futurereference.MODELSERIAL NUMBERUNCRATING THE MACHINEWhen the machine is delivered, carefully inspect the shipping carton and the machine for damage. If damage is evident, save the shipping carton sothat it can be inspected. Contact the Kent Customer Service Department immediately to file a freight damage claim.The cord is already fitted with a molded plug incorporating a fuse, the value of which is indicated on the pin face of the plug.Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating marked thus “10A”.If the fuse cover is detachable, never use the plug with the cover omitted. If a replacement fuse cover is required, ensureit is of the same color as that visible on the pin face of the plug (i.e. red or orange). Fuse covers are available from theParts Department indicated on the last page. If the plug supplied is not suitable for your socket outlet, it should be cut offand destroyed. The end of the flexible cord should be suitably prepared and the correct plug fitted. The wires in the mainlead are colored in accordance with the following code: Blue - Neutral, Brown - Live. As these colors may not correspondwith the colored markings identifying the terminals in your plug, proceed as follows: The wire which is colored Blue must beconnected to the terminal in the plug which is marked with the letter N or colored Blue or Black. The wire which is coloredBrown must be connected to the terminal which is marked with the letter L, or colored Brown or Red.WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH THE LETTER E,BY THE EARTH SYMBOL OR COLORED GREEN OR GREEN/YELLOW.*WARNING: A PLUG WITH BARED FLEXIBLE CORDS IS HAZARDOUS IF ENGAGED IN A LIVE SOCKET OUTLET.For UK and Ireland only:IMPORTANT!THE PLUG IS NOT WATERPROOF - KEEP DRY