KERN 440 Operating Instruction
Also see for 440-21A: Service manualOperating manual
                                | |
Contents
| 
7 Operation7.1 Overview of display7.2 WeighingSwitch on the balance using the key.The balance shows for approx. 3 seconds „88888“ in the display and then goes to„0“. Now it is ready for operation.Important: Should the display flash or not be on „0“, press the key.Only now (!) place goods onto weighing plate. Take care that the weighed materialdoes not touch the balance housing or the base mat.Now the weight is displayed, after the standstill control appears the weighing unit(e.g. g or kg) right-hand in the display.If the goods are heavier than the weighing range, the display will show "Error"(=Overload), and a whistle is sounded.440-BA-e-0941 15 |
Related manuals for KERN 440-21A
manualsdatabase
Your AI-powered manual search engine