KERN 440 Operating Instruction

Also see for 440-21A: Service manual Operating manual

KERN 440 Operating Instruction Manual pdf 19 page image

7.9 Weighing units (Unit)Switch-on the balance using the key and wait for the „0“ display.Press the key and keep it pressed until „UNIT“ appears on the display.Press shortly, the selected unit appears in the display.Use the key to select between the different units (see table).By pressing the key the selected weighing unit is taken over.DisplaydisplayConversion factor1 g =Gram g 1.Pound lb 0.0022046226Ounce oz 0.035273962Troy ounce ozt 0.032150747Tael Hongkong tlh 0.02671725Tael Taiwan tlt 0.0266666Grain gn 15.43235835Pennyweight dwt 0.643014931Momme (mom) 0.2667Tola tol 0.0857333381Carat ct 5Freely selectable factor *) FFA xx.xx*)In order to enter an own conversion factor, press the key as explained aboveuntil „FFA“ is displayed. Press the key to reach to the selection. The last digitbegins to flash. Using the key, the displayed value is increased by 1, with thekey it is reduced by 1. Use the key to jump one digit to the left. When allthe changes are ready, use the key to save this value and by pressing thekey the „Freely selectable factor“ is taken over as current weighing unit.440-BA-e-0941 19